75 % Shorter in a Unique Design

pullCUBE has the shortest machine design ever seen in pultrusion with an overall length of 3.5 meters, including mold, gripper unit and flying cut-off saw. This fits in almost every facility

STRAIGHT & RADIUS READY

pullCUBE comes with the capability of producing straight and, as an add-on, curved profiles. This enables completely new applications within our several markets served.

IN PLACE PRODUCTION

pullCUBE creates new opportunities for any construction area in the world. Instead of being limited in profile length today by transportability, pullCUBE can produce in place and thus create any length required. E.g. a bridge may now have structural elements in full length as per requirement.

70% LESS WASTE

pullCUBE is using a segmented gripper technology for the assisted startup of pultrusion processes. This enables a single operator to realize a startup with dry fibers until the cured profiles reaches the gripper unit. This all happens with reduced waste by 70 % due to pullCUBE’s length of 3.5 meters, in comparison to state of the art pultrusion machines with a length of at least 15 meters.

NO PURGE, NO WASTE!

In pultrusion, the process is repeatedly stopped for 10 to 20 seconds to clean the tool from adhesions. Unfortunately, these parts are often out of tolerance and not usable. pullCUBE does not require a purge cycle. This makes it the most cost efficient and sustainable system on the market. Depending on the profile, you can save i.e. 144.000 euros per year (10 € per part, purge every 20 minutes, 3 shifts, 200 days).

SAFETY & ASSISTED STARTUP

pullCUBE is a completely closed unit and ensures world’s highest production safety in pultrusion,  as operators are not able to touch any hot mold surface, neither the gripper nor the saw.

Start-up has so far been one of the most dangerous steps in pultrusion. With pullCUBE’s segmented gripper, manual intervention is reduced to a minimum. This makes pultrusion really safe!